The specifications and special features of Din Rail terminal blocks:

    1, the terminal can be installed in the U-type and G-type rail;
    2, with complete accessories, such as: file-chip, packet partition ....
    3, with the appearance of the same ground terminal; solve the double-layer wiring, potential distribution, current loop test a special terminal.

    UK product lines: UK1.5, UK2.5B, UK3N, UK5N, UK6N, UK10N, UK16N, UK35N, UKH50, UKH95, UKH150, UL-MBK3/EZ (micro terminals), UL-MBK5/EZ, UL the-UDK4 (double inlet and outlet), UK5-TWIN (double a), UL-UKK3 (two-tier terminals), UKK5, the UL-URTK / S (test terminals), UL-URTK/S-BEN UK5-MTK-P / P (knife breaking terminals), UK5-HESI (fuses terminal), UK10 the-DTEHSI, UBE / D (for terminal group identified, installed in the G-type U-shaped rail), UL-KLM-(to terminal strips are identified, the cards are connected to the terminal fixed on the E, / UK.) / UK (used for type G or U-shaped rail, terminal strip marker the folder KLM or quickly mark articles ZB8 khaki .) baffle (for the terminal group of the middle or the end of the electrical isolation) Article tags (labeled terminal identity, clarity, a group of 10 can be divided into both vertical and horizontal mark.

    Connections: for the terminal central transverse bridge, divisible, with 10 screws.
    UK ground terminal series: USLKG-2.5 USLKG-3 USLKG-5, USLKG-10 USLKG-16, USLKG-35, USLKG-50, USLKG-95, USLKG-1.5, the MBK3-PE, MBK-5-PE , the UDK4-PE, UK5-TWIN-PE the PE UKK3-(double-layer grounded) UKK5-PE.